SKYE Airspeed sensor has an automatic heated pitot tube mechanism. Heated airspeed sensors are highly demanded in DIY UAVs by using Pixhawk flight controllers, it makes the drones to be more reliable and improve the robustness of the avionics systems. Original price was: 199.00 $.189.00 $Current price is: 189.00 $. Available on backorder Payment Methods:
CUAV SKYE Heated Airspeed Sensor for Pixhawk
CUAV SKYE Heated Airspeed Sensor for Pixhawk
SKYE — CUAV Heated Pitot Tube Airspeed sensor Features:
- Built-in STM32F4 processor
- DroneCAN Protocol
- Dual temperature compensation system
- Intelligent de-icing
- IP44 protection class
- Automatic drainage design






FAQ – CUAV SKYE Heated Airspeed Sensor for Pixhawk
-
What is the SKYE Heated Airspeed Sensor used for?
It measures dynamic airspeed in UAVs using a heated pitot tube to improve reliability in harsh conditions. -
Which autopilot platforms does it support?
It supports DroneCAN communication and is compatible with PX4 and ArduPilot based systems. -
What are key features of the sensor’s heating and environment handling?
It incorporates a high-power pitot tube heating system (~35W) and automatic de-icing/drainage functionality to avoid data errors from ice or rain. -
What does the electrical/power and interface profile look like?
It uses a CAN bus interface for data, a power input range suitable for UAV systems (e.g., 12-34V or higher depending on version), and is designed for robust mounting away from prop-wash turbulence. -
What installation / calibration considerations should you know?
You must mount the sensor clear of airflow disturbances (e.g., propellers), wait for the heating to stabilize before calibration, and perform airspeed offset calibration in a no-wind environment. -
Is this product suitable for professional fixed-wing/VTOL UAVs?
Yes — because of its precision, environment-tolerant design (rain, icing, low temperature) and open-source autopilot compatibility, it is a strong choice for advanced UAV applications.
Specifications
Specifications
| Processor | STM32F4 |
| Protocol | DroneCAN |
| Pitot tube temperature control type | Resistance heating |
| Airspeed sensor | MS5525 |
| Sensor performance | |
|---|---|
| Airspeed measurement range | ±500km/h |
| Airspeed accuracy | ±0.69Pa |
| Total Error Band | ±2.5%FS |
| Temperature measurement range | -15℃-150℃ |
| Humidity measurement range | 0-100% |
| Physical characteristics | |
| Pitot tube heating power | 35W |
| DC IN | Default 12-36V |
| Operating Temperature | -20℃±75℃ |
| Size | 82.5×30.4×28.2mm |
| Weight | 22g |
| Protection Level | IP44(To be installed on request) |
Product contents
Product contents
1x SKYE Airspeed Sensor
1x Airspeed HUB
1x Airspeed sensor cable
(HUB->SKYE)
(100cm)
1xCAN Data Cable
(35cm)
1xXT30 Power Cable
(30cm)
1 review for CUAV SKYE Heated Airspeed Sensor for Pixhawk
Clear filtersYou must be logged in to post a review.

















Sophia Collins –
Producto recibido en tiempo récord.