Pixhawk 1 Radiolink UAV Flight Controller

Pixhawk 1 Radiolink UAV Flight Controller Overview

The autopilot has 8 PWM outputs, and 6 PWM auxiliary ports, all of which are configurable.

SDCard slot is provided for logging the flight data for further analysis in case of a crash. You can use Ardupilot and MissionPlanner to control and monitor your drone.

An RGB LED indicator on the flight control for drone shows different states of the autopilot. You can connect the safety switch to the controller for a safer flight. The buzzer is programmed for alarming a different sound for different errors.

Pixhawk 1 Radiolink UAV Flight Controller, is a DIY Open Source Autopilot Drone.

Pixhawk 1 GPS

• Radiolink M8N GPS SE100
• Positioning 20 satellites in 6 seconds at Open Ground
• Supper Valley Station-Keeping Ability
• Concurrent reception of GPS/QZSS L1 C/A, GLONASS L10F, Beidou B1, SBASL1 C/A:WAAS, ENOS, MSAS

Pixhawk 1 Processor

• 32bit 32F427 ARM Cortex M4 Core + FPU (floating point unit)
• 168MHz / 256KB RAM / 2MB Flash
• 32bit fault protection coprocessor
• ST Micro L3GD20H 16 bit gyroscope
• ST Micro LSM303D 14 bit Accelerometer/magnetometer
• MPU 6000 3-axis accelerometer/gyroscope
• MEAS MS5611 barometer

Easy to Setup

• No complicated setup for beginner and professional players
• Download the Mission planner from radiolink website
• Connect via USB cable to the computer
• Easy calibration settings

No complicated setup for beginner and professor player, download the Mission Planner from Radiolink website. Via USB cable connect PIX and computer, easy to operation calibration settings on Mission Planner. Then, enjoy your fly.

Pixhawk 1 Top Configuration

32 bit 32F427 ARM Cortex M4 Core + FPU (floating point unit)
168 MHZ / 256 KB RAM / 2 MB Flash
32bit Fault Protection Coprocessor
ST Micro L3GD20H 16 bit gyroscope
ST Micro LSM303D 14 bit accelerometer/magnetometer
MPU 6000 3-axis accelerometer/gyroscope
MEAS MS5611 barometer

A Good Choice for DIY Drone

Complete installation tutorial, easy to set up, eliminating the cumbersome and complicated installation and calibration process, making your DIY racing drone easier. The Mission Planner can be downloaded from the official website of the Radiolink brand for debugging.

Radiolink PIXHAWK supports a variety of fixed-wing and helicopters, vehicle models and boat models. Supporting Alt hold, Stabilize, Loiter, Pose hold, Return, and other flight modes.

Pixhawk 1 Radiolink UAV Flight Controller – FAQ

1. What is the main processor and architecture used in the Pixhawk 1 Radiolink?
It features the STM32F427VIT6 32-bit ARM Cortex-M4 core processor with a co-processor STM32F100 for fail-safe management, providing high processing performance and stability for UAV control tasks.

2. What sensors are integrated in the Pixhawk 1 Radiolink?
It includes an MPU6000 accelerometer and gyroscope, MS5611 barometer, and external QMC5883L compass, offering precise altitude, attitude, and direction data.

3. Which firmware platforms are supported by the Pixhawk 1 Radiolink?
It supports both ArduPilot and PX4 open-source firmware platforms, allowing users to choose mission planning and tuning software such as Mission Planner or QGroundControl.

4. What are the available purchasing options and delivery details?
The product is offered as a standalone controller or as part of kits including GPS and power modules. Motionew provides international shipping with tracking and estimated delivery times shown during checkout.

5. Does Motionew offer OEM or bulk purchase options?
Yes. OEM, ODM, and wholesale orders are available for system integrators and enterprise buyers. Buyers can request custom labeling, firmware pre-configuration, and volume-based pricing.

6. What documentation and support materials are included?
Each unit comes with user manuals, wiring diagrams, and setup guides accessible through the product’s documentation section. Technical support and firmware update resources are available through Motionew and the Pixhawk developer community.